General Mass Spectrometer Accessories
Perkin Elmer US LLC Single Cell Peltier Accessory for Fluorescence
This accessory is the ideal choice for a wide variety of applications such as the thermal denaturation of proteins. It is compatible with the LL 45/50/55 fluorescence spectrometers. It requires the PCB Accessory Kit for use with the LS 45.
Perkin Elmer US LLC Demountable UHP Quartz Torch - Gray Mark
This demountable ultra pure quartz torch, marked grey, allows for the use of different injectors depending on the application. It is recommended for HF applications (sapphire or Pt injectors) or if removing the injector for cleaning without dismounting the torch is preferred. A PVDF O-ring free holder is included. This torch is included in the PFA-Platinum HF-Resistant Sample Introduction Kit (N8150033).
Perkin Elmer US LLC Cyclonic Spray Chamber with Mount Kit for Optima 2x00/4x00/5x00/7x00 DV/8x00
This kit includes: Cyclonic Spray Chamber Mount, Qty. 1 (N0776001) Cyclonic Spray Chamber Mount Cap, Qty. 1 (N0776002)
Perkin Elmer US LLC Replacement Filters for Helium Cell Gas Filtration System
Note: These filters are not for use with oxygen. Compatible with ICP-MS instruments such as the NexION 1000/2000/350/300.
Perkin Elmer US LLC Ceramic Insulator for EI & CI Trap for SMARTsource
For use with EI/CI ions in SMARTsource (Simplified Maintenance And Removal Technology).
Perkin Elmer US LLC Hyper Skimmer Removal Tool for NexION 5000
The Hyper Skimmer removal tool is used with the NexION 5000 ICP-MS instrument. Also requires Sampler Skimmer Removal Tool (N8160118).
Perkin Elmer US LLC Sampler Skimmer Cone Removal Tool for NexION 5000
The Sampler Skimmer Cone removal tool is used with NexION 5000 ICP-MS series instrument. Hyper Skimmer Removal Tool (N8160119) is also needed for NexION 5000 ICP-MS.
Glass Expansion VeeSpray Ceramic DC Nebulizer, Includes STT-16-75 Sample Tubing 0.75mm ID x 1/16 OD (750mm length), 70-803-1350 Ratchet Connector and 70-803-0772 Ferrule for VeeSpray Nebulizer (1 of each), and 70-803-1292 Gas Fitting with Ratchet Nebulizer connector
VeeSpray DC Nebulizer, includes UniFit Connector with 0.75mm ID x 1.6mm OD x 750mm long tubing (1 pc) & DC Gas Fitting Type 31 with ratchet connector (1 pc). Compatible with Thermo Fisher Scientific PRO, 6000/7000.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate best between 1.5 - 2.5mL/min, must be pumped. Backpressure should read ~40 psi at 0.7L/min gas flow rate. VeeSpray is a V-groove design made from ceramic, ideal for greatest resistance to large particulates, high TDS & HF. Tolerates up to 30% TDS & 300um particulates, providing a robust, virtually unblockable nebulizer. Replacement parts include STT-16-75, 70-803-1350, 70-803-0780, 70-803-1485.Recommend nebulizer cleaning solution is Fluka RBS25 (P/N NC9000117). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion MicroMist DC Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1292 Gas Fitting with Ratchet Nebulizer connector
MicroMist DC Nebulizer 0.4 mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and DC Gas Fitting Type 13 with ratchet connector (1 pc.). Compatible with Advion-Interchim Solation, Agilent 7700/7800/7850/7900/8800/8900, and Horiba.Optimum nebulizer gas flow rate is 1.0L/min and sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. Can tolerate up to 15% TDS. MicroMist is the standard configuration for many ICP manufacturers due to its excellent sensitivity and precision at low flow rates. Replacement parts include P/Ns NFT-16-50 and 501907289.Recommend maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Nickel Sampler Cone, Glass Expansion, Copper core, for iCAP Q or X-Series 3600812. Includes graphite gasket.
Nickel Sampler Cone with Copper Core (3600812), standard sampler cone for Thermo Q/RQ/TQ ICP-MS. Optional sampler cone with more efficient heat transfer for Thermo X Series ICP-MS. Suitable for most common applications (e.g., routine aqueous environmental samples, <5% acid matrix, non-HF, non-organic). Use a new Graphite Sampler Cone Gasket (TG5001) each time the cone is re-installed, even if it¿s the same cone. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.As acid concentrations begin to exceed 5%, and for samples containing hydrofluoric acid (HF), we recommend platinum cones. For samples containing HF and other highly corrosive samples, see catalog number TG1026A-Pt/Cu. For lowest Ni background and laser ablation applications see catalog number TG1021-Al.